Meyer Max Moldboards are constructed of a one-piece, unspliced sheet of Very High Molecular Weight Polyethylene. Curvature is roll formed and locked in place for a precise radius providing the most efficient snow rolling action.
Models CP-7.5, CP-8, CP-8.5, CP-9 For Heavy Duty 3/4 ton and 1 ton Pickups and 1 ton Cab Chassis
- Low coefficient of friction, self-lubricating and very slippery.
- High resistance to abrasion extends moldboard surface life. Resists abrasion six times better than carbon steel.
- High resistance to impact - better than steel or polycarbonates.
- Will not rust. Never needs painting. Color is permanent, ultraviolet resistant and an integral part of the polyethylene composition.
- Zero water absorption, resists snow and ice freezing to surface.
- Moldboard assembly is guarenteed for two years, parts and labor included.
Models STP-7, STP-7.5 For 4x4 Standard Duty Pickups.
Note: STP-7 available with two trip springs
| Polyethylene Snow Plow Model |
STP-7.5 |
CP-7.5 |
CP-8 |
CP-8.5 |
CP-9 |
| Moldboard Length |
7 1/2' |
7 1/2' |
8' |
8 1/2' |
9' |
| Moldboard Height |
27" |
30" |
30" |
30" |
30" |
| Moldboard Gauge |
3/8" Poly |
3/8" Poly |
3/8" Poly |
3/8" Poly |
3/8" Poly |
| Vertical Ribs |
4 |
6 |
6 |
6 |
6 |
| Trip Springs |
3 |
4 |
4 |
4 |
4 |
| Cutting Edge |
3/8" x 6" |
3/8" x 6" |
1/2" x 6" |
1/2" x 6" |
1/2" x 6" |
| Plowing Width At Full Angle |
11" |
79" |
84" |
88" |
93" |
| Sector |
15" |
15" |
15" |
15" |
15" |
| Power Angling Rams |
1 1/2 x 10" |
1 1/2 x 12" |
1 1/2 x 12" |
1 1/2 x 12" |
1 1/2 x 12" |
| Average Weight Complete (lbs) |
708 |
841 |
978 |
816 |
930 |
